Emergency & ICU Ambulances · TANZANIA PROJECT CONFIGURATION
JMC High-Roof Emergency Ambulance
A JMC high-roof emergency ambulance for remote clinics, with source-stated stretcher, oxygen and medical storage.
Core capabilities in operation
Translate vehicle and medical-cabin data into a real project decision. Final performance depends on route, patient-care role, installed equipment and the signed technical schedule.
| Parameter | Procurement meaning | Confirm before order | What changes the result |
|---|---|---|---|
| 4×2 | Source-matched emergency response platform | Approve clinical, RHD and route requirements before production | Road, crew, patient acuity, payload and devices |
| Source record states an auto-loading stretcher with securing device, oxygen cylinders and a medical equipment cabinet. | Contract-defined ambulance conversion | Freeze oxygen, electrical, restraint, storage and device details | Clinical protocol and destination acceptance |
Technical specifications
| Manufacturer | Chengli Special Automobile Co., Ltd. |
|---|---|
| Vehicle model | JMC 2-Axle Emergency Rescue Ambulance |
| Chassis | JMC 4×2 high-roof platform; exact chassis code to confirm |
| Drive type | 4×2 |
| Fuel / energy | Diesel |
| Transmission | Manual |
| Engine power | 142 hp source description |
| Wheelbase | 3300 mm |
| Overall dimensions | 5520 × 1986 × 2580 mm |
| Gross vehicle weight | 3500 kg source class |
| Steering side | Order-specific; source record does not confirm RHD |
| Medical role | BLS/ALS/ICU level is contract-defined; title is not an acceptance standard |
| Stretcher capacity | One stretcher stated; exact type, load rating and lock to confirm |
Published base data supports selection only. The signed chassis, conversion and medical-equipment schedules take precedence.
Medical cabin specifications
| Cleanability | Confirm floor, lining, joints and cleaning compatibility |
|---|---|
| Equipment | Source record states an auto-loading stretcher with securing device, oxygen cylinders and a medical equipment cabinet. |
| Layout | Scaled patient-module drawing and working clearances to confirm |
Oxygen system
| Confirmation | Confirm capacity, reserve, mounting, outlets and endurance |
|---|---|
| Scope | Oxygen provision stated in source |
Electrical system
| Confirmation | Approve load calculation, battery, inverter, shore power and protected circuits |
|---|---|
| Scope | Medical power package is order-specific |
Safety and restraint configuration
| Inspection | Verify warning system, exits and storage retention |
|---|---|
| Restraints | Confirm patient, stretcher and attendant restraints |
| Rhd | RHD not documented by this source listing |
Standard equipment
- Source-stated scope: Source record states an auto-loading stretcher with securing device, oxygen cylinders and a medical equipment cabinet.
- Base vehicle: JMC; JMC 4×2 high-roof platform; exact chassis code to confirm; Diesel; Manual
Configuration options and trade-offs
- Terrain capability: Higher-clearance or 4×4 vehicles may add mass, height and service complexity.
- Clinical scope: More devices require additional payload, power, cooling and maintenance support.
Operating fit
Suitable conditions
- Emergency calls, clinic referrals and regional patient transfer for remote health facilities.
- Projects with a complete clinical and technical acceptance schedule
Not recommended for
- ALS/ICU use without signed device, oxygen, electrical and restraint details
- Orders lacking RHD and destination documentation confirmation
Emergency mission
A JMC high-roof emergency ambulance for remote clinics, with source-stated stretcher, oxygen and medical storage.
Emergency calls, clinic referrals and regional patient transfer for remote health facilities.
Verified source data
Model: JMC 2-Axle Emergency Rescue Ambulance. Chassis: JMC 4×2 high-roof platform; exact chassis code to confirm. Drive: 4×2. Fuel: Diesel. Transmission: Manual. Dimensions: 5520 × 1986 × 2580 mm. GVW: 3500 kg source class. Wheelbase: 3300 mm. Power: 142 hp source description.
Source record states an auto-loading stretcher with securing device, oxygen cylinders and a medical equipment cabinet.
Before clinical acceptance
Confirm RHD, payload, layout, restraints, oxygen, electrical load, devices and Tanzania documentation in the signed technical schedule.
Frequently asked questions
Does the title prove BLS, ALS or ICU capability?
No. Clinical capability is accepted only from the signed device, oxygen, power and restraint schedule.
Is RHD documented?
No. The exact offered chassis requires documentary RHD confirmation before approval.
Verification and procurement support
Vehicle data is mapped from the available product record. Final RHD chassis identity, emissions, patient-compartment layout, medical devices, documents and Tanzania destination requirements must be confirmed in the signed technical schedule.
- Base VehicleListed parameters mapped from source
- Clinical ScopeMarketing labels were not treated as technical acceptance
- IdentitySource product ID, title and category checked
- Images8 unique source-gallery URLs retained